RunCam Device Protocol. RunCam Device Protocol may be the communication that is serial initially developed when it comes to RunCam separate and analog digital digital cameras.

RunCam Device Protocol

RunCam Device Protocol could be the communication that is serial initially developed for the RunCam separate and analog digital cameras.

The protocol itself supports not merely complete digital camera osd menu navigation but additionally triggering recording on split style digital digital cameras in addition to interacting the available sd-card room, syncing the existing date, composing towards the osd and switching the digital digital camera or wifi function (if available) off and on.

Not totally all top features of the protocol are currently supported in betaflight but both betaflights help as well as the protocol it self have been in continued development.

Recently just like TBS Smartaudio and IRC Tramp other businesses (for example Caddx) started initially to follow help for the protocol inside their digital digital digital cameras.

Presently supported features in betaflight

The present protocol specification are present right right right here:

Supported cameras/devices and procedures

Analog/classic fpv cameras

Any RunCam Camera that supports UART digital digital digital camera settings should work.

Micro Swift 3, Runcam Racer 2, etc.

RunCam Split cameras (1,2,mini and mini 2 etc.) also work nevertheless may necessitate a firmware revision. The runcam that is first delivered with an alternative protocol – be sure to update it in any event as more recent firmwares improved different things.

OSD Menu Control

Going into the menu that is osd alter settings should utilize the exact same stick commands as FPV Camera Control

Camera Button Simulation (Record/Photo/Wifi/Power Switch)

Firmware: BetaFlight Firmware (≥3.2.0) Configurator software: Betaflight Configurator (≥3.2.0)

Any UART that is available interface the BetaFlight

1.Connect the RunCam separate using the UART program for the trip Controller

2.Make the trip Controller recognize the Split

For instance, we connect the Split towards the UART 3 user interface from the BetaFlight: link the flight controller to your computer, then start the Betaflight Configurator. Within the Peripherals line associated with line UART3 (on the Ports tab), choose RunCam unit and then click Save And Reboot.

3.Instructions for the functions associated with the camera and assigning transmitter networks for them

Into the Betaflight Configurator, navigate to your Modes tab. You can find brand brand new CAMERA WI-FI, CAMERA POWER and CAMERA CHANGE modes.

CAMERA WI-FI: turn on/off the WIFI for the digital digital camera. Whenever into the OSD of this digital camera, this might be used to verify your selection. CAMERA ENERGY: start/stop the movie. Whenever within the OSD associated with digital camera, this can be utilized to go into the menu item that is next. CAMERA CHANGE MODE: switch on the list of three modes, movie, picture and OSD establishing mode. Whenever when you look at the OSD of this digital digital camera, this can exit the menu. Assign any channel that is available the big event you want, as an example:

Assign the AUX1 towards the CAMERA WI-FI, range 1900-2100 Assign the AUX2 towards the CAMERA POWER, range 1900-2100 Assign the AUX3 into the CAMERA CHANGE MODE, range 1900-2100

4.Assign the channel to your switch for the controller

Please select your Model from the controller, then usage of the Mixer program and designate the channel towards the switch for the controller. Take opentx 2.2.0 as an example, assign the channels CH5, CH6, and CH7 to SA, SB, SD correspondingly.

Energy the trip Controller additionally the RunCam separate

Set the SA to your bottom, the digital camera turns on/off the WIFI Set the SB to your base, the digital digital camera starts/stops the movie Set the SD towards the base, the digital digital camera switches among the list of three modes: video clip, picture websites like fabswingers and OSD environment mode

Caddx Turtle v2

Caddx additionally applied help when it comes to RunCam Device protocol via their firmware that is last enhance. Take note nevertheless that just the turtle v2 correctly supports UART settings since the v1 had some incompatible connections on the board despite having UART pads.

For the v1 you are able to nevertheless utilize FPV Camera Control to enter the OSD and get a handle on the digital digital camera via your transmitter.

Beware that OSD control is disabled during recording.

OSD Menu Control

Going into the menu that is osd alter settings should make use of the exact same stick commands as FPV Camera Control

Camera Button Simulation (Recording)

Just as with the RunCam Split recording that is starting/stopping a switch is supported. Proceed with the directions outlined above to create it.

Other supported devices

RunCam Control Adapter (OSD Cable Simulation)

The RunCam Control Adapter, which links involving the OSD pin plus an UART regarding the FC, permits navigation regarding the OSD menu through the transmitter. Unlike the FPV Camera Control nonetheless no resistors that are additional capacitors are needed.

With regards to the unit some shortcut keys are additionally supported. As an example keeping roll pressed to towards the right will switch the presently chosen scene when utilizing a Micro Swift2.